IP67 RGB LED Controller with 24 Key Remote for 12V Decking Lights, 72w

Colour control for RGB decking lights

This kit is an RGB LED controller with a remote, for a new set of RGB decking lights or as a replacement for an old controller. It only works with RGB decking lights, so check your lights before you order.

Colours and modes

The remote has 16 preset colours and 4 modes (flash, strobe, fade and smooth), plus buttons to turn the brightness up and down and switch the lights on and off.

12V DC only

The controller is for 12V DC decking lights. Don't use it with 24V lights or a 24V supply, as the wrong voltage can damage the controller or the lights. Match the voltage of the lights, the controller and the power supply.

72w maximum load

The controller handles up to 72w. With 2w decking lights, that's up to 30 lights within the limit, though a 10 to 20% safety margin on your power supply is a good idea. Add up the wattage of everything connected and don't go over 72w, as overloading can overheat the controller.

Built for outdoors

Rated IP67, the controller is sealed against dust and water and can sit outside with your decking lights. Plug-in connectors at each end join it to your lights and power supply.

Small and easy to hide

The controller measures just 50 x 35mm and 25mm deep, so it tucks away behind a post, step or planter.

Specifications

• In the box: RGB controller and 24 key remote
• Input and output: 12V DC
• Maximum load: 72w
• Colours: 16 presets
• Modes: flash, strobe, fade, smooth
• IP rating: IP67
• Size: 50 x 35 x 25mm
• Connection: plug-in connectors