Cool White LED Decking Light, 30mm, IP67, 12V, 0.3w, Stainless Steel, Single Light

Add to a set or replace a light

This is a single 30mm cool white decking light. Use it to add lights to an existing run, replace one that's been damaged, or mark a single step. It is 30mm across and only 18.5mm high, with a stainless steel finish that suits wood and composite decking and sits almost flush in the day.

A soft cool white marker

The light is cool white (6000K), a clean, modern tone. At 4 lumens from 0.3w it works as a soft marker light that picks out the edges of steps, paths and decking after dark rather than flooding the area. A 110° beam spreads the glow around the light. It is not dimmable.

Long life on low power

It runs on 12V DC and uses just 0.3w. Average life is 30,000 hours.

Sealed to IP67

The light is sealed against dust and water, so it can stay in exposed decking through rain and frost all year. It also works as a kitchen plinth light.

Driver needed

The light runs on 12V DC, so it needs a compatible 12V LED driver, which is not included. If you're starting from scratch, a pack with a driver is the simpler choice.

Fitting

Drill a 25mm hole and push the light in. It has a 1m cable, 0.5m on each side, and daisy-chains with other lights, so you don't need to run a cable from every light back to the driver. If you need more cable, 1m extension leads are available separately. Use a qualified electrician for any mains connection to the driver.

Specifications

• In the box: 1 decking light
• Power: 0.3w
• Light output: 4 lumens
• Colour: cool white 6000K
• Beam angle: 110°
• Voltage: 12V DC
• Driver: 12V, not included
• IP rating: IP67
• Finish: stainless steel
• Diameter: 30mm
• Height: 18.5mm
• Cut-out: 25mm
• Cable: 1m (0.5m each side)
• Dimmable: no
• Average life: 30,000 hours