80mm RGB LED Decking Light, Colour Changing, IP67, 12V, Stainless Steel

A colour changing light for decks and steps

Use this 80mm RGB decking light to add to an existing set, replace a light or build your own run. At only 26mm high it sits nearly flush with wood or composite decking, and the stainless steel finish keeps a clean look.

Full RGB colour

The light shines in red, green, blue and the colours between, so you can set a calm blue for a quiet evening or cycle through colours for a party. The 110° beam spreads the colour across the boards. The light is not dimmable.

Low power

It uses 2w and runs on 12V DC, a safer choice around children, pets and bare feet. Average life is 30,000 hours.

Sealed to IP67

The light is sealed against dust and water, so it can stay in the deck through rain and frost all year, and it also works as a plinth light in a kitchen.

What you need

This is a single light. It needs a 12V LED driver (8w or 30w) and an RGB controller (V1 or V2), both sold separately, or add it to a decking light kit that has them. Cut a 60mm hole. The light has a 1m cable, 0.5m on each side, and 1m extension leads are available separately.

Specifications

• Power: 2w
• Colour: RGB, colour changing
• Beam angle: 110°
• Voltage: 12V DC (LED driver and RGB controller sold separately)
• IP rating: IP67
• Finish: stainless steel
• Diameter: 80mm
• Height: 26mm
• Cut-out: 60mm
• Cable: 1m (0.5m each side)
• Dimmable: no
• Average life: 30,000 hours