10 Pack 30mm Low Profile LED Decking Lights, Cool White, IP67, 12V, 0.3w, with Driver

A full set of marker lights

This kit has ten 30mm decking lights and an LED driver, enough to line a deck, a set of steps, a path or a border in one go. The stainless steel finish suits wood and composite decking, and at only 18.5mm high the lights sit almost flush in the day.

A soft cool white glow

The light is cool white (6000K), a clean, modern tone. At 4 lumens from 0.3w each, the lights work as soft markers that pick out the edges of steps, paths and decking after dark rather than flooding the area. Spaced out in a line, ten of them give a gentle guide to walk by. Each has a 110° beam. They are not dimmable.

Very low power

Each light uses just 0.3w, so all ten together draw only 3w. Average life is 30,000 hours.

Sealed to IP67

The lights are dust-tight and sealed against water, so they can stay in decking through rain and frost all year, and can also work as plinth lights in a kitchen.

Fitting

Drill a 25mm hole for each light and push it in. The lights run on 12V DC from the included driver and link together in a chain, so you don't need a separate cable run back for each one. Each light has a 1m cable, and 1m extension leads are available separately. The driver can be wired in or plugged into a weatherproof outdoor socket. Single lights and a pack of 6 are also available.

Specifications

• Pack size: 10 lights and 1 LED driver
• Power: 0.3w per light
• Light output: 4 lumens per light
• Colour: cool white 6000K
• Beam angle: 110°
• Voltage: 12V DC
• IP rating: IP67
• Finish: stainless steel
• Diameter: 30mm
• Height: 18.5mm
• Cut-out: 25mm
• Cable: 1m per light
• Dimmable: no
• Average life: 30,000 hours