10 Pack 30mm LED Decking Lights, Cool White, IP67, 12V, with Plug-In Driver

A full set for decks and steps

This kit has ten 30mm decking lights and a plug-in LED driver, enough to line a whole deck, a set of steps, a path or a border in one go. The stainless steel finish looks neat in wood or composite decking in the day and gives a crisp point of light at night. At only 26mm high, the lights stay out of the way.

Cool white light

The light is cool white, a clean, modern tone that picks out the edges of steps and the texture of decking, stone and planters after dark, so people can see where they're walking. Each light has a 110° beam that spreads the light over the surface around it.

Low power

Each light uses just 0.6w for 40 lumens. Average life is 30,000 hours.

Sealed to IP67

The lights are dust-tight and sealed against water, so they can stay in decking through rain and puddles, and can also work as plinth lights in a kitchen.

Fitting

Drill a 22mm hole for each light and push it in. The lights run on 12V DC and link together in a chain back to the driver, so you don't need a separate cable run for each one. Each light has a 1m cable, 0.5m on each side, and 1m extension leads are available separately. The driver plugs into a socket, or it can be wired in. The lights are not dimmable.

Specifications

• Pack size: 10 lights and 1 plug-in LED driver
• Power: 0.6w per light
• Light output: 40 lumens per light
• Colour: cool white
• Beam angle: 110°
• Voltage: 12V DC
• IP rating: IP67
• Finish: stainless steel
• Diameter: 30mm
• Height: 26mm
• Cut-out: 22mm
• Cable: 1m per light (0.5m each side)
• Dimmable: no
• Average life: 30,000 hours