1 Gang Wireless Push Switch, 2.4GHz RF, 1 Zone, Dimming, White, Needs a Receiver

A wall switch for your LED controller

This 1 gang push switch controls one zone of LED lighting through a compatible 2.4GHz RF LED controller. Use it like a normal wall switch: push to turn the lights on and off, and dim them from 0.1% up to full brightness.

Receiver needed

The switch works only with a 2.4GHz RF wireless switch receiver module, which is sold separately. Pair one switch with one receiver. Check that your controller and receiver use 2.4GHz RF before you order. For two or three zones, 2 gang and 3 gang push switches are also available; a receiver handles up to three zones.

No wiring to the switch

The switch talks to the receiver wirelessly at up to 30m, so you can place it where it suits you without running cable to the lights. Put the receiver near the middle of the area for the best signal.

Where to use it

The slim white plate measures 86 x 86mm and blends with white walls. It is rated IP20, so use it in dry indoor rooms such as bedrooms, living rooms, hallways and kitchens away from the sink, not in bathrooms or outdoors.

Specifications

• Type: 1 gang wireless push switch
• Zones: 1
• Dimming range: 0.1% to 100%
• Wireless: 2.4GHz RF
• Control distance: up to 30m
• Receiver: needed, sold separately
• Finish: white
• Size: 86 x 86mm
• IP rating: IP20