Top Bending LED Neon Flex, Natural White 4000K, 24V, IP67, 16x17mm, Price Per Metre

Price per metre. The price shown is for 1 metre. Enter the number of metres you need as the quantity, so a quantity of 5 gets you 5 metres.

Neon outlines that bend up and down

This is top bending LED neon flex: it bends vertically and the light comes from the top face, so it follows the edge of steps, shelves, bars and architectural details for smooth, outlined curves. It gives the look of glass neon, but it is flexible and runs at low voltage.

Clear natural white light

Natural white at 4000K sits between warm and cool white, with no yellow or blue tint. It suits kitchens, dining rooms, offices, workshops and garages, adds task light in a bathroom, and makes garden paths and driveways safer at night. With 140 LEDs per metre the light is even with no dotted effect, and CRI 90 keeps colours looking true. Each metre gives 702 lumens from 9.6w over a 110° beam, and average life is 30,000 hours.

Inside or out

It is rated IP67, so it copes with rain and water jets outdoors and splashes in a bathroom.

Cutting and power

Cut only at the marks, every 50mm, to avoid damaging the circuit. One continuous run can be up to 20m. It runs on 24V DC, so pair it with a 24V LED driver: work out 9.6w for each metre and choose a driver at or above the total. It is dimmable with a suitable driver or controller. If you are not confident with wiring, use an electrician.

Specifications

• Type: neon flex, top bending
• Size: 16 x 17mm
• Colour: natural white 4000K
• CRI: 90
• LEDs: 140 per metre
• Power: 9.6w per metre
• Light output: 702 lumens per metre
• Beam angle: 110°
• Voltage: 24V DC
• Dimmable: yes
• Cut points: every 50mm
• Maximum run: 20m
• IP rating: IP67
• Average life: 30,000 hours
• Sold: per metre