LED Neon Flex, Natural White 4000K, Top Bending, 11w/m, 10x10mm, IP67, Price Per Metre

Price per metre. The price shown is for 1 metre. Enter the number of metres you need as the quantity, so a quantity of 5 gets you 5 metres.

The look of neon in a slim 10mm profile

This LED neon flex gives the soft, solid line of a neon sign, but it bends by hand, cuts to length and runs at low voltage. At 10 x 10mm it's slim enough for fine lettering, tight outlines and narrow recesses. It's a top bending flex, with the light coming out of the top face, so it curves neatly around shapes and corners.

Natural white light

At 4000K the light is a clear, neutral white with no yellow or blue cast. It suits kitchens, offices, studies, workshops, garages, shop displays and garden paths. A CRI of 90 means colours under it look natural.

Output

With 168 LEDs per metre behind the diffuser you see one steady glow, not dots. Each metre gives 770 lumens from 11w over a 110° beam. Average life is 30,000 hours.

Indoors or outside

It's rated IP67, so it can go outdoors in rain and splashes as well as inside.

Length, cutting and power

Cut the flex only at its marked cut points, so you don't damage the circuit. A single continuous run can be up to 13m. It runs on 24V DC, so you need a 24V LED driver: add up 11w for every metre and choose a driver rated at or above the total. It's dimmable with a suitable driver or controller. If you've no electrical experience, have an electrician wire it.

Specifications

• Type: neon flex, top bending
• Size: 10 x 10mm
• Colour: natural white 4000K
• CRI: 90
• LEDs: 168 per metre
• Power: 11w per metre
• Light output: 770 lumens per metre
• Beam angle: 110°
• Voltage: 24V DC
• Dimmable: yes
• Maximum run: 13m
• IP rating: IP67
• Average life: 30,000 hours
• Sold: per metre