IP65 LED Tape, Natural White 4000K, 10w/m, 1157 Lumens, 120 LEDs/m, 24V, Price Per Metre

Price per metre. The price shown is for 1 metre. Enter the number of metres you need as the quantity, so a quantity of 5 gets you 5 metres.

Bright tape for damp areas

This LED tape is rated IP65, so it is protected against dust and water. It suits kitchens, bathrooms and other places prone to moisture, as well as homes and shops that want bright accent or task lighting. With 120 LEDs on every metre, it gives 1157 lumens per metre in natural white 4000K, a clean, balanced light.

Where to use it

Run it under kitchen cupboards, along shelves and display units, in ceiling recesses or around a bathroom mirror. A short run lights a large area, so it's an economical choice for commercial spaces too. For bathroom zones, have an electrician check the installation.

Output and life

Each metre uses 10w and spreads its light over a 120° beam. Average life is 50,000 hours.

Fitting

The tape is 8mm wide. It can be cut every 50mm, so round your lengths to the nearest 50mm.

Driver and dimming

The tape runs on 24V DC, so it needs a 24V LED driver. Multiply 10w by the number of metres and choose the next driver size up: 4m is 40w, so use a 50w driver. Never round down. For dimming, use a standard driver with a remote or wall controller, or a dimmable driver with an LED compatible wall dimmer.

Specifications

• Type: LED tape, single colour, 120 LEDs per metre
• Colour: natural white 4000K
• Power: 10w per metre
• Light output: 1157 lumens per metre
• Beam angle: 120°
• Voltage: 24V DC
• Dimmable: yes
• Width: 8mm
• Cut points: every 50mm
• IP rating: IP65
• Average life: 50,000 hours
• Sold: per metre