4 Zone RGBW Touch Wall Panel, DMX512 Master and 2.4GHz RF Remote, White Glass

Two ways to control RGBW lighting

This touch panel fits on the wall like a light switch and controls RGBW lighting in two ways. As a DMX512 master, it sends standard DMX signals over a wired DMX line to compatible decoders. As a 2.4GHz RF remote, it controls compatible RF receivers wirelessly, so there is no signal cable to run between the panel and the receivers.

Four zones and saved scenes

Set up four zones and adjust each one on its own, for example when different parts of a room need different colours, or control them all together. Save your preferred settings as scenes and recall each with one touch.

RGB colour plus white

The glass colour wheel gives smooth RGB colour mixing, and a separate white channel gives cleaner whites and softer pastel tones than red, green and blue can make on their own. Adjustment runs in 256 steps from 0 to 100%, so changes look smooth rather than jumpy. An LED indicator confirms each touch.

What it works with

The panel is the control end of the system. In DMX mode, pair it with a DMX decoder that drives the lighting; 4 channel RGBW decoders suit RGBW LED strip, and it works with most standard DMX512 decoders. The panel does not power the LEDs itself. In RF mode, pair it with compatible 2.4GHz RF receivers.

Fitting

The panel runs straight from 100-240V AC mains, with no separate power supply, and fits a standard European wall box. Have a qualified electrician fit it. It is rated IP20 for dry indoor locations and works from -30°C to 55°C.

Specifications

• Type: 4 zone RGBW touch wall panel
• Control: DMX512 master or 2.4GHz RF remote
• Zones: 4
• Scenes: scene recall
• Dimming: 256 steps, 0 to 100%
• Face: glass touch, white
• Supply: 100-240V AC
• Mounting: standard European wall box
• Size: 86 x 86 x 36.5mm
• Working temperature: -30°C to 55°C
• IP rating: IP20
• Decoder or receiver: not included