35W IP67 Waterproof LED Driver, 24V DC Constant Voltage, 220-240V Input

35W for smaller 24V jobs

This LED driver supplies up to 35W at 24V DC, enough for a run of LED strip, a few cabinet lights or a small garden lighting circuit. It is made for fixed installations that run for long hours each day.

Constant 24V output

The driver turns 220-240V AC mains into a steady 24V DC constant voltage output, so the brightness stays even along the run. Use it only with lights rated at 24V; it is not suitable for 12V fittings. A 24V system also loses less voltage over longer runs than 12V.

Sealed to IP67

The housing is sealed against dust and can cope with temporary immersion in water, so the driver can be fitted outdoors for garden, signage and architectural lighting, or in damp indoor spaces.

Built-in protection

Overload protection stops the driver running beyond its rated power, over-voltage protection keeps spikes away from the LEDs, and short circuit protection shuts off the output if there's a wiring fault. The power factor is above 0.95.

Sizing and fitting

Add up the wattage of everything you plan to connect and keep the total below 35W. The driver measures 110 x 40 x 29.5mm and has about 250mm of cable on each side. It is not dimmable. Have a qualified electrician make the mains connection.

Specifications

• Output: 35W, 24V DC constant voltage
• Input: 220-240V AC
• IP rating: IP67
• Protection: overload, over-voltage, short circuit
• Power factor: above 0.95
• Size: 110 x 40 x 29.5mm
• Cables: about 250mm each side
• Dimmable: no