25 Pack Matt Black Tilt GU10 Downlights, Adjustable, 90mm

Twenty-five tilt downlights for bigger projects

This pack has 25 matching matt black downlights for property developments, refurbishments and commercial fit-outs, so every room or floor gets the same look and spares are less of a worry. GU10 lamps are not included.

Point the light where you want it

Each downlight has a tilting gimbal, so you can aim the light rather than only shining it straight down. Use them to pick out work areas, artwork, shelves, signs or shop displays, or to create different zones in an open-plan room. Angling the beam away from eye level also cuts glare.

Matt black finish

The matt black bezel and gimbal blend into a dark ceiling or stand out against a light one, and look the same across every room they're fitted in. The 90mm bezel covers a 75mm cut-out, hiding rough edges.

Lamps and dimming

Each fitting takes a GU10 lamp up to 50w, so you choose the brightness, colour and beam angle: warm, cool, colour changing or smart. LED GU10 lamps use far less energy than halogen, and changing a lamp is a simple swap. To dim the lights, use dimmable GU10 lamps with a compatible dimmer switch.

Fitting

The downlights connect straight to the mains, with no driver or transformer, and run on 100-240V. Cut a 75mm hole for each; it's a standard size, so they often fit straight into the holes left by old downlights. They are rated IP20, so use them in dry indoor rooms, and they are not suitable for covering with loft insulation. Have a qualified electrician fit them.

Specifications

• Pack size: 25
• Type: tilt (adjustable)
• Lamp holder: GU10, up to 50w (lamps sold separately)
• Finish: matt black
• Bezel diameter: 90mm
• Cut-out: 75mm
• Input voltage: 100-240V
• Dimmable: with dimmable GU10 lamps
• Insulation coverable: no
• IP rating: IP20