2.4GHz Wireless Switch Receiver Module, 3 Zones, Dimming, for RF Push Switches

The receiver for wireless push switches

This receiver module pairs with the 2.4GHz RF wireless push switches, so you can switch and dim your lighting from a wall switch without running cable to it. It is the receiver only; the 1, 2 or 3 gang push switch is sold separately, and you need both for it to work.

Up to three zones

The receiver controls up to three independent zones, in one room or across several. Use a 3 gang push switch to control all three zones, or a 1 or 2 gang switch for one or two.

Dimming

Dim the lights anywhere from 0.1% to full brightness: bright for cleaning and cooking, low for a film or a quiet evening.

Range and power

The switch and receiver talk over 2.4GHz RF at up to 30m, so you can put the switch where it suits you. Check that the rest of your system uses 2.4GHz RF before you order. The receiver runs on one CR2032 battery, so it needs no mains wiring.

Small and indoor

At 39 x 31 x 11mm, it tucks out of sight behind furniture. It is rated IP20, so use it in dry indoor rooms, away from sinks and showers and not outdoors.

Specifications

• Type: wireless switch receiver module
• Zones: up to 3
• Dimming range: 0.1% to 100%
• Wireless: 2.4GHz RF
• Control distance: up to 30m
• Power: CR2032 battery
• Size: 39 x 31 x 11mm
• Compatible switches: 1, 2 and 3 gang 2.4GHz RF push switches (sold separately)
• IP rating: IP20