60W IP67 Waterproof LED Driver, 24V DC Constant Voltage, 220-240V Input

60W for everyday 24V jobs

This LED driver supplies up to 60W at 24V DC, enough to run several strip lights, cabinet lights or plinth lights from one supply. It suits kitchen cabinets, display shelving, feature lighting and accent lighting in homes, shops and offices.

Constant 24V output

The driver turns 220-240V AC mains into a steady 24V DC constant voltage output, so the brightness stays even along the run. Use it with lights rated at 24V; it is not suitable for 12V fittings. A 24V system also loses less voltage over longer cable runs.

Sealed to IP67

The housing is dust-tight and sealed against water, including occasional submersion, so the driver can be fitted outdoors or anywhere damp where a standard indoor driver would not be suitable.

Built-in protection

Voltage regulation keeps spikes away from the LEDs, overload protection stops the driver running beyond its rated power, and short circuit protection cuts the output if there's a wiring fault. The power factor is above 0.95.

Sizing and fitting

Add up the wattage of everything you plan to connect and keep the total below 60W. The driver measures 155.5 x 41.5 x 30mm and has about 250mm of cable on each side. It is not dimmable. Have a qualified electrician make the mains connection.

Specifications

• Output: 60W, 24V DC constant voltage
• Input: 220-240V AC
• IP rating: IP67
• Protection: over-voltage, overload, short circuit
• Power factor: above 0.95
• Size: 155.5 x 41.5 x 30mm
• Cables: about 250mm each side
• Dimmable: no